Rosenbauer America

Home >

Rosenbauer Fire Pumps

Designed for the customer's needs, Rosenbauer fire pumps are the most versatile pump systems available. The highest quality materials and workmanship along with excellence in engineering design are employed in the creation for every pump system. With over 90 years of pump manufacturing experience Rosenbauer's dependable, efficient fire pumps are ready to perform and Ready to Serve.

		Download PDF Fire Pump Brochure

		Rosenbauer Pump Videos Ultra High Pressure System

Rosenbauer 500, 700, 1000 and 1250 GPM
Multi-Stage Fire Pumps

Capable of high flow and high pressure simultaneously
Maintenance-free, rotating mechanical seals
Lightweight, high strength allow construction
Helical cut gears for maximum transfer of power
Vertically split pump case for ease of service
Quiet, efficient operation
Most effective pump-and-roll performance

	Engine:

	Design:

	Pump Construction:

	Gear Case:

	Gears:

	Impellers:

	Priming System:

NH 500 GPM at 150 PSI
NH 750 GPM at 150 PSI
NH 1000 GPM at 150 PSI
NH 1250 GPM at 150 PSI
*Meets full NFPA rating. All models also produce 100 GPM at 600 PSI simultaneously from the High Pressure stage.

Multi-Stage High Pressure/Volume Fire Pump

High-grade alloy pump body and accurately balance impellers mounted on a stainless steel shaft.

Constructed from high-strength alloy with a pump shaft supported by three roller beall bearings - two located in the gear case and one in the suction inlet. Bearings are protected from sediment by maintenance-free, self-adjusting mechanical seals.

Gears are high strength, low noise and helical cut for maximum transfer of power and pump. Mulitple final drive gear ratios are available for maximum performance.

High-grade, light alloy impellers and diffusers.

Powered by a Rosenbauer positive displacement double-acting piston pump with oil bath lubricated oving parts. Promer pump is belt-driven from the pump gear case and automatically acturated when the pump is engaged. The priming pump disengages as prime is achieved and positive pressure is attained. Oils and lubricants are not expelled into the atmosphere in the priming process. A primer oil reservoir is not required and never needs refilling.

Fox High Performance Pump

A premium lightweight pump. With excellent performance and straight forward operation, the Fox pump is a high output system for applications where portability is key. The latest generation Fox pump is powered by a BMW motorcycle engine with guaranteed reliability in tough firefighting conditions. The fully automatic priming pump is built to last, unaffected by contaminated water, extended use or relay operations. The pressure governor automatically maintains constant pressure regardless of water flow, and an optional mechanical thermal protection and cavitation alarm offers maximum protection to the pump.

BMW two-cylinder four-stroke 65HP, electronic fuel injection Electric start with manual back-up Engine-mounted cooling fan, oil cooled Fuel Capacity: 5.25 gal (20 L) low-mount tank

Single-stage aluminum centrifugal pump Aluminum casing, cambered impeller in spiral housing Automatic piston priming pump with manual shut-off Stainless steel pump, maintenance-free seals

265 GPM at 220 PSI (1000 LPM at 15 bar) 425 GPM at 145 PSI (1600 LPM at 10 bar) 500 GPM at 90 PSI (1900 LPM at 6 bar)

Automatically controlled double action piston pump with manual cut-off Approx. priming time for suction height of 10': 5 sec Approx. priming time for suction height of 20': 20 sec

Lit panel with techometer, hourmeter, pressure gauges, LED monitor for battery charge, oil pressure and fuel Optional engine overheat, cavitation alarm Detachable spotlight Aluminum frame with four fold-out handles

(L x W x H) 37" x 29" x 33" (940 x 735 x 840 mm)

Dry: approx. 330 lb. (150 kg) Full fuel: approx. 370 lb. (167 kg)

Engine:

Pump:

Performance:

Suction Pump:

Package:

Dimensions:

Weight:

Ultra High Pressure System
UHPS

* Minimum water demand adapts well to smaller vehicles * Lightweight hose affords easy handling * Operates with all foam types * Minimum water damage
A proven and extensively tested system
developed in a joint project by Rosenbauer
and the US Air Force.

Minimal water damage in the complete
conversion of water to vapor. Continuous
extinguishing or in bursts, adjustment between
jet and spray patterns.
An integrated foam system and aspirating
attachment offer maximum foam fire fighting.
Fixed pressure and output require no
adjustments once system is started.

Ultra high pressure (1450 psi) produces very fine water particles that in turn provide greater surface coverage. A full jet stream penetrates the
flames and attacks the source of the fire.

The core of the Rosenbauer UHPS is
the reliable & durable Briggs & Stratton
16 HP Vanguard engine driving a sixcylinder
high-pressure pump at a
preset output of 10 gpm @ 1450 psi.
With infinite foam settings .1 - 6%
system is fully-automatic and requires
no adjustments once started.
Standard with a five gallon foam tank
and water tank capacity up to 300
gallons depending on the application
and vehicle mounting location.
The components of the UHPS can
be mounted in a variety of different
configurations making the packaging
adaptable to a wide array of
apparatus. As a slide-in unit for a
pickup or brush truck, as a retrofit to
an existing apparatus, or the ATV
system for a parking ramp or forest
service - the options are only limited
by your imagination.