Aerial Command Seat
Aerial Command Seat (ACS) affords great visibility for aerial operations. With the ACS, operators will have control of the aerial and waterway monitor functions at their fingertips. The ACS is going to be an added benefit for operators' stations at the turntable while having personnel in the on the aerial or in a platform operating the aerial. It will add extra comfort on long lasting fires and reduce the stress on firemen standing for long periods of time. The new, single joystick controls the aerial raise/lower function, as well as the extend/retract and left-to-right functions. By simply flipping a switch, the monitor's stream, pattern, up/down and left-to-right functions can equally be controlled from the joystick.  The joystick will also be able to activate the aerial's AC and DC lights, as well as switch the aerial speed between high and low. Four different lights on the joystick will illuminate to indicate which functions are selected. The Can-Bus joystick uses the latest technology allowing our in-house staff to set-up each Programmable Logic Controller (PLC) to assure a safe, smooth and easy-to-operate aerial using this single control. (Not available on T-Rex or Raptor)

EZ Load Hosebed
Loading hose on aerial hosebed's is now safer with Rosenbauer's EXCLUSIVE EZ Load electric hosebed. The hosebed simply lowers off the side of apparatus for easy access to the well. Capable to stowing 1500 ft.of rubberized 5" intake hose. Our control switch is mounted at the rear of the body.

Central Extruded Aluminum
Rosenbauer Central body styles feature a wide range of compartment configurations and strong, durable bodies so you can build the truck you want. Tough enough to get the job done, Rosenbauer Central Bodies live up our highest, most important standards. Yours. Learn More

General Extruded Aluminum
At Rosenbauer, we think paying attention to the smallest details is a big deal. We construct each General model from our own patented body design, so every part is given just as much attention as the next. Because the details that go into our trucks are just as important as results that come out of them. Learn More

Centurion Body (Aluminum, Stainless Steel or Composite)
The engineering staff at Rosenbauer uses the most advanced computer software programs on the market today to help ceate the most innovative body designs that are more durable and economical than anything you have ever seen in the past. Learn More

Fireline Galvannealed Steel Body
Rosenbauer FireLine bodies are available in many configurations and feature a modular design for easy repair or remount. Constructed from 12 gauge galvannealed steel, FireLine bodies are economical, extremely durable and corrosion resistant. Offered with a variety of fire pumps and foam systems, Rosenbauer FireLine bodies bend solid steel to meet your needs. (Not Available with Aerials) Learn More

Standard Viper Aerial Features
Hot Dipped Galvanized Outriggers
Flexible E-Track for wiring
Two-way intercom system
Flow rates up to 1250 GPM
Elevations: 60' & 65' are -8 to 80 degrees
75' 85' 100' & 109' rear mount are -10 to 75 degrees
100' mid mount is -12 to 75 degrees
Retractable waterway
Flow charts
Torque box built to accommodate full NFPA ladder requirements
Safety belt attachments and rope rescue eyelets
500 lb. live load flowing water
20-year structural warranty
Inclinometer
Extension markings on base section

Optional Viper Aerial Features
Hot-Dipper Galvanized ladder
Rung alignment lights - rung lights are optional -- the rung alignment light is standard
Smart Aerial
Pump panel controls
Tip controls on end of fly section
Aerial/Monitor Wireless Remote Control with send/recieve transmitter
Radio remote controls
Self leveling outriggers (when ladder is supplied with four outriggers)
AC lights at base and tip of aerial
Three-way intercom system
Breathing air

Roof ladder mounts on base section
Stokes basket on the base section
120 volt 20 amp receptables at the tip fly section